Home > Blossary: Knife Anatomy
A glossary detailing specialist terminology for describing the construction and classification of knives.

Category: Technology

43 Terms

Created by: Manadono

Number of Blossarys: 4

My Terms
Collected Terms

The secondary bevel is the bevel from which the cutting edge is formed. It is usually a very small bevel that joins the endpoints of the primary bevel on both sides to a point. A secondary bevel is ...

Domain: Engineering; Category: Mechanical engineering

The flat grind, as explained partially under FFG, is the mid-point between the convex and hollow grinds, the bevel's cross section being a straight line from the flat of the blade to the cutting ...

Domain: Engineering; Category: Mechanical engineering

A convex grind is the opposite to the hollow grind, the knife's cross section showing a slight convex bow to the bevel. Just as the hollow grind, the convex grind is also not especially popular, but ...

Domain: Engineering; Category: Mechanical engineering

A hollow grind is a type of bevel that can be allied to a knife, like FFG or convex. The cross section of the knife would show two concave parabola that meet at a point (on the blade), and arch up to ...

Domain: Engineering; Category: Mechanical engineering

A swedge is a part of some knifepoint constructions where the spine of the knife is tapered into the point and, in some circumstances, sharpened. The start of the swedge's taper is usually only at ...

Domain: Engineering; Category: Mechanical engineering

A back fuller is similar to a swedge, in the fact that it is made from reshaped or removed material on the spine of the knife, however a back-fuller usually covers the majority of the length of the ...

Domain: Engineering; Category: Mechanical engineering

A fuller is a groove or channel applied to a knife blade to decrease weight and increase strength. Fullers may be ground from or pressed into the blade, however only pressing increases rigidity. This ...

Domain: Engineering; Category: Mechanical engineering

Member comments


( You can type up to 200 characters )

Post  
My other Blossarys

A glossary detailing specialist terminology for ...

Category: Engineering

By: Manadono